PetSafe® In-Ground Containment – How to Change Collar Correction Level
Important Information
Level 1 is a training level, which is tone only. Set the collar to level 2 or higher for static correction and tone.
Remove the clear protective button cap by turning it counter-clockwise with a coin or Test Light Tool.
Press and release the collar button one time and count the number of flashes. This shows the current collar level. (1 flash indicates level 1, 2 flashes indicate level 2, and so on).
Press and release the button again within 5 seconds to increase the correction by one level. Continue to press and release the button until you reach the desired level.
- Level 1: Training, tone only
- Levels 2 - 5: Static correction
If you need a lower level, continue to increase the levels past the highest, level 5, to cycle back down to level 1.
Contact Customer Care
If you need further assistance, please contact our customer care team.