How To Test the PetSafe® Stay & Play® Fence

Ensure both contact points on the collar are the same length and hand tight.

Set the collar to the highest correction level. This will make the light on your test light tool the most visible and beneficial in sunny conditions. For assistance with changing the correction level, visit How to Change the Correction Level on the PetSafe® Stay &Play® with Replaceable Battery Collar.

Place the contact points on the wires of the Test Light Tool.

While holding the collar and test light tool in hand, walk slowly towards the boundary.

Hold the collar at about waist height when testing at the boundary.

Watch the test light tool, when the collar activates and delivers a static correction, the center of the test light tool will flash an amber light and the collar will beep. If you don’t see an amber light, the collar is not delivering a correction.

The test light can be hard to see in bright daylight- shielding the light on the tool with your hand will help with seeing the light better.

Set your collar back to your pet’s correction level once you’ve completed testing. For assistance with changing the correction level visit How to Change the Correction Level on the PetSafe® Stay &Play® Fence Collar.