How to Replace the Batteries in My PetSafe® Automatic Ball Launcher
Important Information
The ball launcher can be powered with batteries or the included power adapter.
While powered on, the LED will flash a green light once every 10 seconds to indicate good battery power. When the batteries are low, a red light will flash quickly 3 times every 10 seconds.
Remove batteries before storing the ball launcher for an extended time.
Flip the ball launcher over and remove the battery cover by pressing the two tabs and lifting.
Remove old batteries and discard. Insert 6 D-cell Alkaline batteries according to the diagram.
Replace the battery cover by inserting one side into the slots and then pressing the tab side down until it clicks into the notches.
Contact Customer Care
If you need further assistance, please contact our customer care team.