How To Pair My PetSafe® Pro Dog Trainer Remote and Collars
Pair a Single Collar
Start with the collar turned off. Turn the collar off by pressing and holding the power button until the collar beeps high to low and the light glows red.
Press the rocker switch on the right side to wake the remote. Please note that using the tone or vibration/static button to wake the remote will activate the collar.
Put the collar into pairing mode by pressing and holding the power button. The collar light will glow green. Continue to hold.
Release the button when the light goes back out. The collar is now in pairing mode.
Press and hold the tone button (lower button) on the remote. The collar light will flash green 5 times to confirm it is paired with the remote. Additionally, the collar will begin to tone.
To test all functions of your remote and collar, visit How To Test My PetSafe® Pro Dog Trainer.
Pair a Second Collar
Toggle to Dog 2 by pressing the Dog 1/2 button (left-side button) on the remote. The remote will display the Dog 2 icon.
If the Dog 2 icon does not appear when the left-side button is pressed, you may need to activate Dog 2. To do this, press and hold the Dog 1/2 button (left-side button) on the remote until the Dog 2 icon starts flashing, then release.
Start with the collar turned off. Turn the collar off by pressing and holding the power button until the collar beeps high to low and the light glows red.
Put the collar into pairing mode by pressing and holding the power button. The collar light will glow green. Continue to hold.
Release the power button when the light goes back out. The collar is now in pairing mode.
Press and hold the tone button (lower button) on the remote. The collar light will flash green 5 times to confirm it is paired with the remote. Additionally, the collar will begin to tone.
To test all functions of your remote and collar, visit How To Test My PetSafe® Pro Dog Trainer.
The remote will save the most recent stimulation level used for each pet; when you switch between pets, the stimulation level will switch automatically.
You can remove the second dog by pressing and holding the button on the left for 5 seconds. Dog 1 head will blink to confirm Dog 2 has been removed.