How to Install the Happy Ride® Dog Barrier in Your Car
Follow along with the setup article for information on how to get the metal barrier ready to be installed in the car.
Configuration Examples
Car Installation
Insert the threaded rods into each straight tube to create the support rods.
In the back of your car, stand the support rods up with the round caps on the floor. Rotate the large wingnuts until the oval cap is pressed firmly against the ceiling.
Mount each tube onto the support rods. Press and hold the blue button, slide the clamps onto the rectangular slots, and release.
Adjust each oval tube position by loosening the wingnut on the mounting brackets and sliding the tubes up or down. Tighten the wingnut when the tubes are in the desired position.
Extend each tube left or right by loosening the wingnut on the clamps and moving left or right. Tighten the wingnuts when the tubes are in the desired position.
Contact Customer Care
If you need further assistance, please contact our customer care team.