How to Fit the PetSafe® Pawz Away® Barrier Collar on My Cat
Start by making sure you are using the cat strap for your collar. The strap will have an elastic section on the strap. If you do not have this strap, one can be purchased online by clicking here.
Ensure your pet is standing.
Place the collar below the pet’s chin, located on the center of the neck. You may need to part the fur, so the contact points make connection with the skin.
Adjust the collar strap so that it is snug enough that you can only fit one finger behind the contact points.
The collar should move with the skin, not over the top of it when you attempt to shift the collar gently from side to side.
Recheck the fit of the collar after 10 minutes.
Mark the collar at least 2 inches past the slide buckle. Allow additional length if your pet is not fully grown.
Remove the collar from your pet and trim the strap.
Seal the cut end of the strap with a lighter or clear glue to prevent fraying.
Contact Customer Care
If you need further assistance, please contact our customer care team.