How to Disassemble and Clean the PetSafe® Viva™ Fountain

Important Information

  • Fountains should be cleaned every 2-4 weeks. 
  • Replace the Ion-X™ filter every 2-4 weeks.
  • Replace the foam filter every 1-2 months.

Multiple pet households may need more frequent cleanings.

Do not use harsh cleaning chemicals or citrus-scented cleaning products.

Unplug From Outlet And Disconnect USBUnplug From Outlet And Disconnect USB

Unplug the fountain from the wall and disconnect the USB plug from the adaptor.

Empty Water Into SinkEmpty Water Into Sink

Empty any remaining water from the fountain.

Important: To avoid spills, tilt the fountain back slightly and water will pour through the tray vent into the bowl.

Remove Tray, Rubber Seal And Housing FilterRemove Tray, Rubber Seal And Housing Filter

Remove the tower tray, filter housing and rubber cap.

Insert Foam Filter Into Housing AssemblyInsert Foam Filter Into Housing Assembly

Remove and discard or rinse the foam filter.

Do not clean filters with soap.

Replace Used FilterReplace Used Filter

Remove and discard or rinse the Ion-X™ filter.

Diagram Of FountainDiagram Of Fountain

Disassemble and clean the pump by hand using a mild detergent or a 50/50 solution of white vinegar and water. For more information on cleaning the pump, visit How to Disassemble and clean the PetSafe® Viva Fountain Pump.

Disassemble the rest of the fountain and clean each part with soap and water. You can also place each part in the top rack of the dishwasher.

Do not place the pump or adaptor in the dishwasher.

Reassemble the fountain, replace the filters, and continue use as normal. For more information on assembling the fountain, visit How to Assemble the PetSafe® Viva Fountain.


Contact Customer Care

If you need further assistance, please contact our customer care team.

We’d love your feedback on the page you just read!

Related Articles