How to Disassemble and Clean My PetSafe® Smart Feed Automatic Pet Feeder

Before You Begin:

If the feeder is currently in use, unplug the feeder and empty the feeder before beginning.

Remove Lid from FeederRemove Lid from Feeder

Remove the lid from the feeder.

Unlatch Hopper From Both Sides of the BaseUnlatch Hopper From Both Sides of the Base

Unlatch the hopper from both sides of the base and remove it.

Pull the Red Latch on the Conveyor Towards the BackPull the Red Latch on the Conveyor Towards the Back

Pull the red latch on the conveyor towards the back of feeder to an upright position.

Lift Conveyor from Base of FeederLift Conveyor from Base of Feeder

Lift the conveyor from the base of the feeder.

Remove Crumb Catcher from Bottom of ConveyorRemove Crumb Catcher from Bottom of Conveyor

Remove the crumb catcher from the bottom of the conveyor.

Dishwasher SafeDishwasher Safe

Only wash the removed components with warm soapy water. Rinse well and dry thoroughly before reassembling. For assistance with reassembly, visit How to Assemble My PetSafe® Smart Feed Automatic Pet Feeder.

Do NOT get the base of the feeder wet. The crumb catcher and conveyor are NOT dishwasher safe.


Contact Customer Care

If you need further assistance, please contact our customer care team.

We’d love your feedback on the page you just read!

Related Articles