How to Assemble My PetSafe® Drinkwell® Stainless Multi-Pet Fountain
Place the foam filter around the pump.
Place the pump in the base of the bowl.
Install the intake tube into the top of the pump.
Install the filter housing into the top of the cone and turn clockwise until snug.
Place the intake tube into the bottom of the filter housing.
Line the pump cord up with the notch in the center cone and place the cone in the center of the bowl.
Use the cord clips to hold the center cone in place and to cover the cord. Start by placing the clip on the bottom of the bowl first then gently snapping it over the edge of the bowl.
Place the charcoal filter into the center of the filter housing.
Rinse the charcoal filter with cool water until the water runs clear prior to use.
Place the spout ring on top of the filter housing and twist into place.
Press the flow control cap into the top of the spout ring.
Fill the fountain with water and place on a level surface.
Plug the fountain into a wall outlet.
Contact Customer Care
If you need further assistance, please contact our customer care team.