How To Assemble My PetSafe® Creekside Ceramic Pet Fountain

Thread Pump Cord Through Bowl StemThread Pump Cord Through Bowl Stem

Feed the pump cord through the top of the bowl stem.

Place Pump And Foam Filter Onto BowlPlace Pump And Foam Filter Onto Bowl

Place a foam filter around the pump and place the pump in the bottom of the bowl.

Place Rubber Cap Onto StemPlace Rubber Cap Onto Stem

Place the rubber cap into the stem and fold the excess over the top of the stem.

Install New Filter For HousingInstall New Filter For Housing

Rinse the carbon filter until the water runs clear, then place the carbon filter into the filter housing.

Place Filter Housing On top Of PumpPlace Filter Housing On top Of Pump

Insert the filter housing into the top of the pump. Align the circular piece on the filter housing with the circle on the top of the pump. The flat side of the filter housing will rest against the stem of the bowl.

Place Tower Over Filter HousingPlace Tower Over Filter Housing

Place the tower over the filter housing. Press down so that the silicone gasket seals.

white boxwhite box

Fill the fountain bowl with water.

Connect To PowerConnect To Power

Connect the power adaptor.


Contact Customer Care

If you need further assistance, please contact our customer care team.

We’d love your feedback on the page you just read!

Related Articles