How To Assemble My PetSafe® Avalon Ceramic Pet Fountain

Thread the pump cord through the top of the bowl stem.

Place a foam filter around the pump and place the pump in the bottom of the bowl.

Place the rubber cap into the stem and fold the excess over the top of the stem.

Rinse the carbon filter until the water runs clear, then place the carbon filter into the filter housing.

Insert the filter housing into the top of the pump. Align the circular piece on the filter housing with the circle on the top of the pump. The flat side of the filter housing will rest against the stem of the bowl.

Place the tower over the filter housing. Press down so that the silicone gasket seals. Fill the fountain bowl more than halfway full with water.

Connect the power adaptor.